1. Cleaning of oil transportation equipment of high pressure washer

 

Oil tankers, rail tankers, etc. are common. Because the types of oil transported each time may be different, each time the oil transport equipment is reloaded and overhauled, cleaning is required to ensure the safe operation of various power facilities and the maintenance of hot work. Oil transportation equipment generally adopts hot water high pressure washer and is equipped with three-dimensional tank washer and feeding mechanism to complete the entire cleaning operation. After the pure water enters the hot water tank through the pipeline of the high pressure washer, it is more appropriate to use steam to heat the water to 50-70 ° C. The pure water required by the water supply pump is transported through the pipeline.

 

The temperature and level control system can be used to adjust the amount of water and the temperature of the water supply. Usually, a high-pressure washer pump is used to transport water through the pipeline to the core high-pressure water pump of the high-pressure washer. Then, the high-pressure water pump pressurizes ordinary pressure water into high-pressure water. The high-pressure water reaches the control system through the high-pressure washer pipe. The cleaning operation is completed by a three-dimensional rotating nozzle.

 

 

 

2. the pressure washer pipe cleaning

 

The pipe cleaning nozzle of the high-pressure cleaner drives the high-pressure hose forward, and finally completes the pipe cleaning operation. At present, when some enterprises use high-pressure cleaners to clean pipes, they have additionally provided a set of cleaning device feeding mechanism, which can be used for both the internal cleaning of the pipeline and the external wall of the pipeline, but it will be limited by the length of the feeding mechanism, so Mainly used for cleaning short tubes.

 

  

 

3.the pressure tank cleaning tank cleaning

 

The choice of pressure and flow of the high-pressure cleaner depends on the volume of the oil tank, the condition of the scale on the wall of the tank, and the cleaning requirements. When the scale is light and hot water is used for cleaning, the pressure need only be small. In areas where fouling is severe, the pressure of the high pressure washer may be very high. Therefore, we need to choose the appropriate pressure on the premise of ensuring all-round cleaning. Because oil products are prone to corrosion of steel plates during the storage of oil tanks, despite various anticorrosive measures, the results are not satisfactory.